船型参数对骑浪/横甩薄弱性衡准影响研究

骑浪/横甩是IMO船舶第二代完整稳性的五种失效模式之一,是一种基于概率的稳性衡准,制定规范的目的是更有效地保障船舶在实海域中的航行安全,确保不发生稳性失效情况.本研究中,以IMO有关成员国提出的最新版骑浪/横甩薄弱性衡准草案为基础,基于自主开发的骑浪/横甩薄弱性衡准校核软件,针对围网渔船开展了样船计算和比较分析,研究IMO正在制定的骑浪/横甩薄弱性衡准方法对该类船型的适用情况,分析船型参数对骑浪/横甩薄弱性衡准的影响,为我国参与国际法规制定,提出针对骑浪/横甩薄弱性衡准的提案提供技术支撑和依据.     

船舶低硫柴油系统设计的分析与优化

就新辟航线首制船“汉亚直达”集装箱船的低硫柴油系统,叙述了船舶低硫柴油系统的设计经验,从当前国内外对船用燃油硫含量的要求、应对方案到船舶低硫柴油冷却方式选择、低硫柴油冷却系统设计、高/低硫柴油转换、使用低硫柴油风险分析及处理等方面进行详细叙述,为业内同行提供参考。     

基于三电平逆变器的永磁同步电动机直接转矩控制新方法

在永磁同步电动机数学模型和三电平空间矢量调制法的基础上,提出一种基于三电平逆变器拓扑结构的永磁同步电机直接转矩控制新方法。该方法采用bang-bang控制器对电机进行控制,通过新型合成矢量开关表对固定合成矢量的选取,有效地抑制了三电平逆变器直流侧支撑电容中点电位波动、限制了输出电压变化率dv/dt并降低了开关损耗,同时系统还具有良好的稳态响应特性及动态响应特性。通过理论分析与仿真结果证明了该控制方法的可行性。     

液压式盾构/TBM主机平移-空推集成装置的研制

研究目的:目前,隧道掘进机平移与空推工艺多采用不同装置分步完成,装置安装耗时费力,严重影响项目施工进程,且国内外没有可同时解决掘进机主机平移和空推的工法或装置。本文研制了一种基于液压的盾构/TBM主机平移-空推集成装置,将平移与空推工序合一,可极大提高工程施工效率,实现荷载600 t盾构/TBM主机连续移位。研究结论:(1)利用液压力驱动液压马达实现装置移位和驱动轮90°转向,实现了平移与空推工艺集成;(2)多轮系和从动轮碟簧设计可优化载荷分布,从动轮选用自润滑推力关节轴承使装置可适应一定倾斜度和不平度,提升装置运行平稳性;(3) 600 t荷载下,利用聚氨酯包敷于钢轮外的复合轮设计减小了轮系与地面接触应力,降低地面要求;(4) ANSYS仿真分析表明承载台架满足强度要求;(5)目前该装置已成功应用于青岛地铁8号线项目,缩短工期20 d,填补了国内外技术空白,应用前景广阔。     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

船舶推进同步电机PTI/PTO模式研究

PTI/PTO推进是最近发展起来的一种新型船舶推进方式,兼具传统柴油机推进和电力推进优点,可实现多种船舶工作模式,具有操控性好、安全、经济等特点,将是未来船舶推进方式发展方向之一.本文介绍了PTI/PTO推进模式理论和工作模式,便于理解该推进方式,希望有助于船舶推进技术的发展.     

STAAD/CHINA在搭架设计及强度校核中的应用

搭架作业是船舶修造日常工作中比较普通、常见的工程,合理、快速地设计和校验脚手架的强度,直接影响生产施工的安全性、经济性和效率。文章介绍了如何使用有限元软件STAAD/CHINA对搭架方案进行建模计算及校验,计算结果接近实际,提高了强度校验的效率。     

Dynamic demand estimation and prediction for traffic urban networks adopting new data sources

Nowadays, new mobility information can be derived from advanced traffic surveillance systems that collect updated traffic measurements, both in fixed locations and over specific corridors or paths. Such recent technological developments point to challenging and promising opportunities that academics and practitioners have only partially explored so far.The paper looks at some of these opportunities within the Dynamic Demand Estimation problem (DDEP). At first, data heterogeneity, accounting for different sets of data providing a wide spatial coverage, has been investigated for the benefit of off-line demand estimation. In an attempt to mimic the current urban networks monitoring, examples of complex real case applications are being reported where route travel times and route choice probabilities from probe vehicles are exploited together with common link traffic measurements.Subsequently, on-line detection of non-recurrent conditions is being recorded, adopting a sequential approach based on an extension of the Kalman Filter theory called Local Ensemble Transformed Kalman Filter (LETKF).Both the off-line and the on-line investigations adopt a simulation approach capable of capturing the highly nonlinear dependence between the travel demand and the traffic measurements through the use of dynamic traffic assignment models. Consequently, the possibility of using collected traffic information is enhanced, thus overcoming most of the limitations of current DDEP approaches found in the literature.     

快速老化小鼠的学习记忆缺陷及其生化机制

目的用快速老化小鼠(SAMP8)模拟老年痴呆,观察其学习记忆能力,并探讨其学习记忆能力下降的可能机制。方法采用10月龄SAMP8,并用同龄抗快速老化小鼠(SAMR1)作为正常对照。用水迷路检测近记忆以及空间学习记忆能力。用生物化学方法检测大脑皮层线粒体膜电位和ATP酶活力,观察线粒体功能;检测皮层和海马胆碱乙酰基转移酶(ChAT)和乙酰胆碱酯酶(AChE)的活力,观察中枢胆碱能神经功能;检测血清超氧化物歧化酶(SOD)活力和丙二醛(MDA)含量,观察其全身性氧化应激状况。结果与SAMR1相比,SAMP8出现明显的衰老体征,其近记忆和空间学习记忆能力明显减弱,具有衰老和痴呆特征;皮层线粒体膜电位和ATP酶活力显著降低,海马ChAT活力显著下降,AChE活力显著升高,血清SOD活力稍有增高。结论SAMP8可以很好地模拟老年痴呆,其机制包括大脑皮层线粒体功能降低、海马胆碱能神经功能下降以及氧化应激等。     

基于ASP.NET的B/S架构的软件在Windows7系统下的部署

本文重点研究了对于B/S架构的软件在Windows7系统下部署时应该采用的一系列方法及在部署时遇到的一系列问题的解决方案。文中分析了利用ASP.NET开发的B/S架构的软件的优点并在此基础上介绍了软件部署的流程。本文在分析过程中结合具体实例提出了部署中一些常见问题的解决方案。